WI-1022GG-TF
Dual AMD Opteron™ 6000 series (6300 ready) processors (Socket G34) 16/12/8/4-Core ready; HT3.0 Link support, 2x double width GPU cards supported, optimized for GPU solution (GPU cards not included), Up to 512GB DDR3 Registered ECC 1600/1333/1066 SDRAM in 16 DIMMs
Note:
Image above may show a varied configuration of optional parts. Please refer to parts list for standard parts included.
- Dual AMD Opteron 6000 series processors (Socket G34)
16/12/8/4-Core ready; HT3.0 Link support - 2x double width GPU cards supported,
optimized for GPU solution (GPU cards not included) - Up to 512GB DDR3 Registered ECC
1600/1333/1066 SDRAM in 16 DIMMs - 2x full height full length PCI-e Gen 2.0
x 16 slots; 1x low-profile PCI-e x8 Gen 2.0 in x16 slot
(accommodates AOCs up to 5.9″ in length) - Dual-port GbE LAN Controller, 4x USB 2.0 ports, 1x dedicated LAN for system management (IPMI2.0)
- 3x Hot-swap SATA Drive Bays
- 1400W High-efficiency Power Supply Gold Certified
- 1x Low-profile PCI-E 2.0 in x16 slot
(For add-on card up to 5.9″in length)
Product SKUs
AS-WI-1022GG-TF
A+ Server WI-1022GG-TF (Black)
Motherboard
Super
H8DGG-QF
Processor/Chipset
CPU
- Dual 1944-pin Socket G34
- Supports up to two 16/12/8/4-Core ready AMD Opteron 6000 Series processors
- HT3.0 Link support
Chipset
Dual AMD chipset SR5690 + SP5100
Note
Supports 6000 processors with Max ACP 80W
(TDP 115W) at 30°C
System Memory
Memory Capacity
- Sixteen DIMM sockets
- Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 16 DIMMs*
- Quad channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
DDR3 1600/1333/1066 MHz Registered ECC or unbuffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
1.35V or 1.5V
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board Devices
SATA
AMD SP5100 (RAID 0, 1, 10)
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
Network Controllers
- Intel® 82576 controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
VGA
Matrox G200 16MB DDR2
Super I/O
Winbond® W83527 chip
Input / Output
SATA
3x SATA2.0 (3Gb/s) Ports
LAN
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
USB
- 4x USB 2.0 ports
- 2x Rear and 2x header
VGA
1x VGA port
Serial Ports
- 1x Fast UART 16550 serial port
- 1x serial port header
PC Health Monitoring
CPU
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
FAN
- Up to 8-fan status tachometer monitoring
- Up to eight 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control (4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
Temperature
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan connectors
- I2C Temperature Sensing Logic
LED
- CPU / System Overheat LED
- +5V Standby Alert LED
Other Features
- Chassis Intrusion Detection
- Chassis Intrusion Header
Chassis
Form Factor
1U Rackmount
Model
SC818G-1400B
Dimensions
Height
1.7″ (43mm)
Width
17.2″ (437mm)
Depth
28.2″ (716mm)
Gross Weight
38 lbs (17.2 kg)
Available Color
Black
Front Panel
Buttons
- Power On/Off button
- System Reset button
LEDs
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
Expansion Slots
1U
2/1 PCI-E 2.0 x16/x8 in x16 (2 GPU)
Drive Bays
Hot-swap
- 3x 3.5″ Hot-swap SATA drive bays
- Enterprise SATA HDD only recommended
Peripheral Drives
DVD-ROM
Slim DVD-ROM drive (optional)
Backplane
SATA HDD Backplane
System Cooling
Fans
8x 4cm heavy-duty counter-rotating PWM fans with optimal fan speed control
Power Supply
1400W high-efficiency power supply with PMBus
AC Input
- 1200W: 100 – 140V, 50 – 60Hz, 10.5 – 14.7 Amp
- 1400W: 180 – 240V, 50 – 60Hz, 7.2 – 9.5 Amp
DC Output
+5V standby
4 Amp
DC Output
+12V
- 100 Amp @ 100-140V
- 117 Amp @ 180-240V
Certification
Gold Certified
System BIOS
BIOS Type
16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
Operating Environment / Compliance
RoHS
RoHS Compliant
Environmental Spec.
- Operating Temperature:
10°C to 30°C (50°F to 86°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
*規格如有變更，恕不另行通知。
Parts List - (Items Included)
Part Number
Qty
Description
Motherboard
MBD-H8DGG-QF
1
Super H8DGG-QF Motherboard
Chassis
CSE-818G-1400B
1
1U Chassis
Cable 1
CBL-0484L
2
SATA,INT,ROUND,ST-ST,55CM,30AWG
Cable 2
CBL-0157L
1
CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,40CM,28AWG
Cable 3
CBL-0390L
1
Dual 6+2 pin to Twin MB 20 pin GPU power extension cable, 40/37cm. 18/20AWG
Cable 4
CBL-0481L
1
SATA,INT,ROUND,ST-ST,81CM,30AWG
CD
CDR-APLUS2
1
DRIVER CD FOR AMD SP5100 CHIPSET MB
Heatsink / Retention
SNK-P0042P
2
1U Passive CPU HS for AMD Socket G34
Riser Card
RSC-R1U-E16R
1
RSC-R1U-E16R
Riser Card
RSC-R1UG-E16S
1
(EOL)RSC-R1UG-E16S
Optional Parts List
Part Number
Qty
Description
Hot-swap 2.5″ kit (FDD slot)
MCP-220-81504-0N
1
Single slim 2.5″ SAS3 (12Gb/s) hot swap in slim FDD form factor
Software
SFT-OOB-LIC •
1
OOB Management Package (per node license)
Software
SFT-DCMS-Single
1
DataCenter Management Package (per node license)