WI-1017C-TF

1U, 4x 2.5″ Hot-swap HDD bays w/ E3-1200 & v2; 330W Gold Level Power Supply

Note:

Image above may show a varied configuration of optional parts. Please refer to parts list for standard parts included.

 
  • Single socket H2 (LGA 1155) supports Intel® Xeon® E3-1200 & v2 series, 2nd Gen Core i3 processors*
  • Intel® C202 PCH Chipset
  • 4x 2.5″ Hot-swap SATA2 HDDs (RAID)
  • 1x PCI-E 3.0* x8 FHFL slot
  • Up to 32GB DDR3 ECC 1333MHz / 1600MHz* UDIMMs in 4 sockets
  • Intel® 82579LM and 82574L, 2x Gigabit Ethernet LAN ports
  • IPMI 2.0 on Dedicated LAN
  • 6x SATA 2.0 with RAID 0, 1, 5, 10
  • 330W Gold Level Power Supply
  • Disk-on-module (DOM) power connector
Specification

Product SKUs – Discontinued SKU (EOL).
Please contact sales-rep for alternative options.

SYS-WI-1017C-TF

SuperServer WI-1017C-TF (Black)

Motherboard

Super X9SCL-F

Processor/Cache

CPU

  • Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors * ^
  • Socket H2 (LGA 1155)

System Memory

Memory Capacity

  • 4x 240-pin DDR3 DIMM slots
  • Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)

Memory Type

1600*/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

8GB, 4GB, 2GB, 1GB

Memory Voltage

1.5 V

Error Detection

  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset

Intel® C202 PCH chipset

SATA

6x SATA 2.0 (3Gbps) w/ RAID 0, 1, 5, 10

IPMI

  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC

Network Controllers

  • Dual Intel® 82579LM and 82574L Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)

VGA

Nuvoton WPCM450RA0BX

Super I/O

Nuvoton NCT6776F

Clock Generator

CK505

Input / Output

Serial ATA

  • 6 SATA 2.0 (3Gbps) ports
  • 6 SATA hard drives supported

LAN

  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port

USB

  • 2x USB rear ports
  • 1x USB Type-A
  • 6x USB ports via header
  • Total 9 USB 2.0 Compliant

VGA

1x VGA port

Keyboard / Mouse

PS/2 keyboard and mouse ports

Serial Port / Header

  • 1x Fast UART 16550 serial port
  • 1x internal header

Chassis

Form Factor

1U Rackmount

Model

CSE-111LT-330CB

Dimensions

Height

1.7″ (43mm)

Width

16.8″ (426mm)

Depth

21.95″ (558mm)

Gross Weight

38 lbs (16.5kg)

Available Colors

Black

Front Panel

Buttons

  • Power On/Off button
  • System Reset button

LEDs

  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED

Ports

  • 2x USB & DB9 COM port tray
  • (Optional – in place of floppy drive)

Expansion Slots

PCI-Express

1x PCI-E 3.0* x8 Full-height Full-length slot

Drive Bays

Hot-swap

4x 2.5″ Hot-swap SATA2 HDDs with RAID

Backplane

SAS/SATA HDD Backplane
(SAS support requires optional SAS controller)

System Cooling

Fans

3x Cooling Fans

Power Supply

330W AC power supply w/ PFC

AC Voltage

100-240 V, 50-60 Hz, 4.5 Amp max

+5V

18 Amp

+5V standby

3 Amp

+12V

27 Amp @ 100-180Vac,
31 Amp @ 180-240 Vac

-12V

0.5 Amp

+3.3V

15 Amp

Certification

  Gold Certified

System BIOS

BIOS Type

8Mb SPI Flash EEPROM with AMI BIOS

BIOS Features

  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3

Operating Environment / Compliance

RoHS

RoHS Compliant

Environmental Spec.

  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)

*規格如有變更,恕不另行通知。

Parts List

Parts List - (Items Included)

    

Part Number

Qty

Description

Motherboard / Chassis

MBD-X9SCL-F

CSE-111LT-330CB

1

1

Super X9SCL-F Motherboard

1U Chassis

Backplane

BPN-SAS-809TQ

1

4-port 1U SC809/SC111 TQ backplane (with enclosure management), support up to 4x 2.5-inch SAS/SATA HDD

Cable 1

CBL-0061L

1

31.5CM SATA FLAT S-S PBF

Cable 2

CBL-0157L

1

8PIN TO 8PIN RIBBON CABLE FOR SGPIO, PB FREE

Riser Card

RSC-RR1U-E8

1

RSC-RR1U-E8

Heatsink / Retention

SNK-P0046P

1

1U PASSIVE CPU HS FOR INTEL LGA1156

BIOS rev. 2.0 or above is needed to support new E3-1200 v2 CPUs, which supports PCI-E 3.0 & DDR3 1600.
^ Per Intel’s spec, for platforms using C202/C204 PCH:
   1) Intel i5/i7 CPUs are not supported
   2) Intel E3-12×5 series processors which have integrated graphics support are not supported

Optional Parts List

    

Part Number

Qty

Description

3.5″ to 2.5″ Converter Tray

MCP-220-00043-0N

Black Hot-swap Gen-4 2.5″ to 3.5″ HDD tray

Software

SFT-DCMS-Single

1

DataCenter Management Package (per node license)