WI-6026TT-GIBXRF

Intel Xeon processor 5600/5500 series, with QPI up to 6.4 GT/s, Up to 192GB** DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM, 1 (x16) PCI-E 2.0 for Double-Width GPU

Note:

Image above may show a varied configuration of optional parts. Please refer to parts list for standard parts included.

 

Two hot-pluggable systems (nodes) in a 2U form factor.
Each node supports the following:

  • Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
  • Up to 192GB** DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
  • 1 (x16) PCI-E 2.0 for Double-Width GPU
  • Integrated IPMI 2.0 with KVM and Dedicated LAN
  • Dual Intel® 82574L Gigabit Ethernet Controller
  • 6x Hot-swap SATA Drive Bays
  • 1400W Gold-level High-efficiency Redundant Power Supply
  • Mellanox ConnectX DDR Infiniband 20Gbps Controller w/ QSFP connector
Specification

Product SKUs – Discontinued SKU (EOL).
Please contact sales-rep for alternative options.

SYS-WI-6026TT-GIBXRF

SuperServer WI-6026TT-GIBXRF (Black)

Motherboard

2x Super X8DTT-HIBXF+

Processor/Cache

CPU

  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Intel® Xeon® Processor X5600/ E5600/ L5600 Series (Westmere) 40W – 95W 
    • Intel® Xeon® Processor X5500/ E5500/ L5500 Series (Nehalem-EP) 38W – 95W

QPI

up to 6.4 GT/s

System Memory

Memory Capacity

  • 12x 240-pin DIMM slots
  • Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported

Memory Type

1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

1GB, 2GB, 4GB , 8GB** , 16GB**

Memory Voltage

1.5 V / 1.35 V

Error Detection

  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices (per Node)

Infiniband

Mellanox ConnectX DDR Infiniband 20Gbps Controller

Chipset

  • Intel® 5520 (Tylersburg) chipset
  • ICH10R

SATA

  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support

IPMI

  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC

Network Controllers

  • Dual Intel® 82574L Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

Matrox G200eW

Super I/O

Winbond W83527HG chip

Clock Generator

932S421 chip

Input / Output (per Node)

Serial ATA

  • Six Serial ATA ports
  • 6 SATA hard drives supported

LAN

  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port

USB

  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant

VGA

1x VGA Port

Serial Port

1 Fast UART 16550 serial port

Infiniband

1 External QSFP Infiniband Connector

PC Health Monitoring

CPU

  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator

FAN

  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control

Temperature

  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI

LED

  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED

Other Features

SDDC Support

Chassis

Form Factor

2U Rackmount

Model

CSE-827HD-R1400B

Dimensions

Height

3.5″ (89mm)

Width

17.2″ (437mm)

Depth

28.5″ (724mm)

Gross Weight

85 lbs (38.6kg)

Available Colors

Black

Front Panel (per Node)

Buttons

  • Power On/Off button
  • UID button

LEDs

  • Power LED (on power button)
  • Network activity LED
  • System Overheat/fan fail/power fail/ LED
  • UID LED (on UID button)

Expansion Slots (per Node)

PCI-Express

1 (x16) PCI-E 2.0 for Double-Width GPU

Drive Bays (per Node)

Hot-swap

6x 3.5″ SATA Hot-swap drive bays

Hard drive Backplane

2U Hard drive Backplane

System Cooling

Fans

4x Cooling Fans

Power Supply

1400W high-efficiency (1+1) redundant power supply with PMBus

AC Input

  • 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
  • 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz

DC Output

  • 1100W: +12V/92A; +5Vsb/4A
  • 1400W: +12V/116A; +5Vsb/4A

With Distributor

  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp

Certification

  Gold Certified

System BIOS (per Node)

BIOS Type

32Mb SPI Flash EEPROM with AMI® BIOS

BIOS Features

  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support

Operating Environment / Compliance

RoHS

RoHS Compliant

Environmental Spec.

  • Operating Temperature:
    10°to 35°C (50°to 95°F)
  • Non-operating Temperature:
    -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5 to 95% (non-condensing)

*規格如有變更,恕不另行通知。

Parts List

Parts List - (Items Included)

    

Part Number

Qty

Description

Motherboard / Chassis

MBD-X8DTT-HIBXF+

CSE-827HD-R1400B

2

1

Super X8DTT-HIBXF+ Motherboard

2U Black Chassis

Backplane

BPN-SAS-827HD

1

12-port 2U Twin (6 drives per node) midplane, support up to 12x 3.5-inch SAS/SATA HDD

Backplane

BPN-ADP-PWR

2

BPN-ADP-PWR

Backplane

BPN-827ADP-X8-H+

2

BPN-SASADPûSAS827-X8DTT-H+;no cable req

Cable 1

CBL-0333L

4

6+2pin GPU power extension from MB GPU 8pin, 30cm

CD

CDR-X8

1

For X8 series

Riser Card

RSC-R2UT-E16R

2

RSC-R2UT-E16R

Heatsink / Retention

SNK-P0037P

4

1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)

Optional Parts List

    

Part Number

Qty

Description

NVIDIA GPU card support

AOC-GPU-NVC2050 +
MCP-310-82712-0B
(each GPU card)

AOC-GPU-NVC2070 +
MCP-310-82712-0B
(each GPU card)

 

NVIDIA C2050 TESLA Fermi GPU/active HS (w/ 3GB cache mem.)
Additional mylar air shroud for SC827HD with C2050 GPU

NVIDIA C2070 TESLA Fermi GPU/active HS (w/ 6GB cache mem.)
Additional mylar air shroud for SC827HD with C2070 GPU

** Please check ‘Tested Memory List‘ for compatibility