WI-5086B-TRF (Complete System Only)

Highest Density 5U 8-Way Server; Super-High Computing Performance, 8x Intel Xeon 8-core 7500^ series and 10-core E7-8800 family processors supported, 64x DIMM slots support up to 2TB Reg. DDR3 ECC SDRAM**

Complete System Only:
To maintain quality and integrity, this product is sold only as a completely-assembled system (including but not limited to CPU, memory, and HDDs).

  • Highest Density 5U 8-Way Server; Super-High Computing Performance
  • 8x Intel® Xeon® 8-core 7500^ series and 10-core E7-8800 family processors supported
  • 64x DIMM slots support up to 2TB Reg. DDR3 ECC SDRAM**

  • 4x PCI-E 2.0 x16 + 2x PCI-E 2.0 x8 (in x16 slot) or 10x PCI-E 2.0 x8 full-height full-length slots

  • Dual Gigabit Ethernet LAN ports

  • 16x 2.5″ HDDs and 2x 5.25″ devices; up to 24x 2.5″ HDDs with optional HDD module***

  • 6x SATA2 ports onboard

  • Onboard BMC supports IPMI 2.0 + KVM with dedicated LAN

  • 6x 9cm Hot-swap cooling fans

  • 2800W hot-swap (2+2) redundant high-efficiency power supplies Gold Level Certified

Specification

Product SKUs – Discontinued SKU (EOL).
Please contact sales-rep for alternative options.

SYS-WI-5086B-TRF

SuperServer WI-5086B-TRF (Black)

Motherboard

X8OBN-F (1) + X8OBN-CPU (4) + X8OBN-BR1 (2)

Processor/Cache

CPU

  • Octal 1567-pin LGA Sockets
  • Supports up to eight Intel® Xeon® 64-bit processor(s) of the same type below:
  • Intel® Xeon® processors 7500^ series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-8800 family (10-core, codename Westmere-Ex) supported

QPI

up to 6.4 GT/s

System Memory

Memory Capacity

  • 64x 240-pin DIMM sockets
  • Supports up to 2048 GB DDR3 ECC reg. memory

Memory Type

1333* / 1066 / 978 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

1GB, 2GB, 4GB, 8GB, 16GB, 32GB**

Memory Voltage

1.5 V, 1.35V**

Error Detection

  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

Chipset

  • 2x Intel® 7500 (Boxboro-EX) chipset
  • ICH10R

SATA

  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)

IPMI

  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC

Network Controllers

  • Intel® 82576 Dual-Port Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

Matrox G200eW 16 MB DDR2

Super I/O

Winbond 83527HG chip

Input / Output

LAN

3x RJ45 LAN ports (1 for IPMI)

USB

Total of 8 USB 2.0 ports (2x rear,
4 via 2x internal headers, 2x Type A)

SATA

6x SATA2 ports

Serial Port / Header

  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header

VGA

1 VGA port

PC Health Monitoring

CPU

  • Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
  • 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V

FAN

  • 10x 4-pin fan headers with tachometer status monitoring
  • Low noise fan speed control mode

Temperature

  • Monitoring for CPU and system environment
  • Thermal Control for 10x fan connectors

Other Features

Chassis intrusion detection

Chassis

Form Factor

5U Rackmountable

Model

CSE-758A-R2800B

Dimensions

Height

8.6″ (219mm)

Width

17.2″ (437mm)

Depth

30″ (762mm)

Weight

Gross Weight: 176 lbs (79.83 kg)

Available Colors

Black

Drive Bays

Hot-swap

16x 2.5″ HDDs

Peripheral Bay(s)

2x 5.25″ drives

Expansion Slots

PCI-Express

4x PCI-E 2.0 x16 + 2x PCI-E 2.0 x8 (in x16) or 10x PCI-E 2.0 x8 full-height, full-length slots

System Cooling

Fans

  • 4x Hot-Swap Cooling Fans
  • 2x Hot-Swap Rear Exhaust Fan

Shrouds

4x CPU card air shrouds for SC758

Power Supply

2800W (2+2) Redundant 1400W high-efficiency power supply with PMBus

AC Input

  • 1200W: 100 – 140V, 50 – 60Hz, 10.5 – 14.7 Amp
  • 1400W: 180 – 240V, 50 – 60Hz, 7.2 – 9.5 Amp

DC Output
+5V standby

6 Amp

DC Output
+12V

  • 100 Amp @ 100-140V
  • 117 Amp @ 180-240V

Certification

  Gold Certified

System BIOS

BIOS Type

32Mb SPI Flash EEPROM with AMI® BIOS

BIOS Features

  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support

Operating Environment / Compliance

Environmental Spec.

  • Operating Temperature: 
    10° to 35° C (50° to 95°F)
  • Non-operating Temperature: 
    -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 
    5% to 95% (non-condensing)

*規格如有變更,恕不另行通知。

Parts List

Parts List - (Items Included)

    

Part Number

Qty

Description

Motherboard / Chassis

MBD-X8OBN-F

MBD-X8OBN-CPU

MBD-X8OBN-BR1

CSE-758A-R2800BP

1

4

2

1

X8OBN base board (for server SKU only)

X8OBN processor board (for server SKU only)

X8OBN bridge board (for server SKU only)

SC758 incomplete 5U Chassis (for server SKU only)

Backplane

BPN-SAS-I28A

2

8-port Mobile-Rack hot swappable HDD backplane (W/ 2x vertical iPass), support up to 8x 2.5-inch SAS/SATA HDD

Cable 1

CBL-0116L

2

IPASS TO 4SATA,CROSS OVER, 50CM, PBF

Cable 2

CBL-0449L

2

HDD power extension for X8OBN, special 8pin to 4 HDD

CD

CDR-X8-O

1

Driver CD for X8-O series motherboard

Heatsink / Retention

SNK-P0044P+

8

Special CPU heatsink for Nehalem-EX

I/O Shield

MCP-260-00027-0N

1

Std I/O shield for X8, H8, X7SB3 server MB (3rd LAN + 4x LAN)

Mounting Rails

MCP-290-00057-0N

1 set

Rail set, quick/quick, default for 4U 17.2″W

Optional Parts List

    

Part Number

Qty

Description

Mounting Rail

MCP-290-00058-0N

Short rail set, quick/quick, optional for 2~4U 17.2″W

Add on cards

AOC-SAS2LP-H8iR

AOC-SAS2LP-H4iR

AOC-STGN-i2S

AOC-E10GSFPSR

AOC-MHQH29B-XTR

AOC-MHQH29C-XTR

AOC-QLE2562

2108 based SAS/SATA RAID- 8 internal ports/Low profile-PCI-E

2108 based SAS/SATA RAID- 4 internal ports & 4 external ports

STD Dual-port 10G Ethernet with SFP+ W/ CDR

OPTI MOD 10G SR/1000BASE-SX FOR E10G42BTDA

MHQH29B-XTR,IB 2-P QDR,PCIe2.0,QSFP,PBF

MHQH29C-XTR,IB,2-p,QDR,PCIe2.0,QSFP,PBF

QLOGIC QLE2562 2-port 8Gb Fibre Channel PCI-E

HDD Module

CSE-M28SAB-OEM


SAS Mobile Rack CSE-M28SAB w/o fan module

Cable

CBL-0281L

IPASS TO IPASS 75CM PBF

Cable

CBL-0333L

6+2pin GPU power extension from MB GPU 8pin, 40cm

^ Supported 7500 series processors include X7560, X7550, E7540, L7555, L7545, X7542 only
* Run at speed – 1066MHz
** Please check Tested Memory List for compatibility; 4Gb DRAM, 32GB or 1.35V memory requires rev 2.01 or above boards with Millbrook II
*** Additional RAID/HBA card and cables may be required (for detail, please consult with sales representative)